Опис
KD Submissions turns Elementor Pro form submissions into a simple lead inbox and dashboard on the front end (/pieteikumi), so site owners can work with their leads without going into wp-admin.
Lead management
- Combined list of all new (unread) submissions across forms.
- Multiple statuses per submission, custom statuses, and comments shown as pills.
- Filter by form, status and date; hide or show columns; rename forms and fields.
- Add submissions manually (e.g. leads from a phone call).
- Access for Administrators, Editors and Shop Managers.
Analytics
- Dashboard with submissions, email and phone link clicks, visitors and sessions (visitors and sessions come from Independent Analytics, if installed).
- Charts for submission trends, statuses, forms and lead sources.
- Lead source for every submission: UTM source, external referrer (e.g. google.com, facebook.com) or direct visit.
Privacy-friendly lead source tracking
- The source is remembered across pages in a first-party cookie (
ref_source, 30 days) only after the visitor gives analytics consent. Supported: WP Consent API, Cookiez banner, or a customwindow.kdSubmissionsHasConsent()function. - Without consent nothing is stored on the visitor’s device; only the source of the current page view is sent with the form.
- The cookie is deleted when consent is withdrawn.
Optional: KEY DIGITAL client portal
Sites maintained by KEY DIGITAL can share aggregated statistics (numbers only, no personal data) with the KEY DIGITAL client portal. This is off by default and described in detail under External services below.
External services
This plugin can connect to the KEY DIGITAL client portal (go.key-digital.lv, operated by KEY DIGITAL SIA, Latvia) so the site owner and their maintainer can see site results in one place.
The connection is off by default. It is switched on in Pieteikumi Iestatījumi KEY DIGITAL statistika (or with define( 'KEYD_WHMCS_SYNC', true ); in wp-config.php). Sites that were already sending statistics with version 2.2.0 or older keep it on after updating and see a one-time admin notice with a link to switch it off.
What is sent (aggregated numbers and names only, no personal data):
– site address and name;
– number of submissions, unread submissions, and distribution by status;
– number of submissions per form (top 5) and per traffic source, e.g. Google, Facebook, direct (top 5);
– number of clicks on email and phone links;
– number of visitors and sessions (from Independent Analytics, if installed) and conversion rate.
Not sent: submission content, names, email addresses, phone numbers, IP addresses, uploaded files or any other personal data.
When: after a new submission or contact click (at most once per minute), once a day as a summary, and when the portal requests the current unread count (POST /wp-json/keyd/v1/unread-count, signed requests only). When sharing is switched off or the plugin is deactivated, a single signed notice with only that state (no statistics) is sent, so the portal can show why data stopped.
Security: each site generates its own key. The key is sent once over HTTPS during registration and confirmed by the portal through POST /wp-json/keyd/v1/handshake. All later requests in both directions are signed with HMAC-SHA256 (timestamp + nonce); the key is not sent again.
- Privacy policy: https://key-digital.lv/privatuma-politika/
- Terms of use: https://key-digital.lv/lietosanas-noteikumi/
Снимци екрана
ЧПП
Does the plugin require Elementor Pro?
Yes. Submissions are read from Elementor Pro’s form submissions tables.
How do I add a new status?
Use the Status Manager button. The new status is available immediately.
Can I filter submissions by multiple criteria?
Yes, by form, status and creation date at the same time.
No. Without analytics consent the lead source is only taken from the page the visitor is on when submitting the form, and nothing is stored in the browser. You can change the consent category or cookie lifetime with the
keyd/referral/configfilter.My leads now show „Tiešais apmeklējums“ (direct visit) more often. Why?
Since 2.2.1 the source is remembered across pages only with analytics consent. Visitors who decline cookies and browse a few pages before submitting are recorded as a direct visit. This is expected and required by EU cookie rules.
What does the plugin send to KEY DIGITAL?
Only when you switch it on: aggregated numbers (submissions, clicks, visitors, top forms and lead sources by count). Never names, emails, phone numbers, IP addresses, messages or files. See External services.
How do I switch statistics sharing on or off?
Pieteikumi Iestatījumi KEY DIGITAL statistika. Agencies can force the setting with
define( 'KEYD_WHMCS_SYNC', true );(orfalse) inwp-config.php.The KEY DIGITAL portal confirms the connection by calling
/wp-json/keyd/v1/handshakeon your site. Security plugins, firewalls or a password on the site can block it. Allow that route, then click Izveidot savienojumu no jauna. Automatic retries slow down after failures (15 min, 1 h, 3 h, 6 h, 12 h, then daily).
Рецензије
Нема рецензија за овај додатак.
Сарадници и градитељи
„KD Submissions“ је софтвер отвореног кода. Следећи људи су допринели овом додатку.
Сарадници
Преведите „KD Submissions“ на свој језик.
Заинтересовани сте за развој?
Прегледајте кôд, погледајте SVN складиште или се претплатите на дневник развоја преко RSS-а.
Дневник измена
2.2.1
Security and privacy release. Recommended for all users.
KEY DIGITAL portal connection:
– Removed the shared secret that was built into the plugin. Each site now creates its own key, registers it once with the portal (confirmed by a callback to the site) and signs every request with HMAC-SHA256 including timestamp and nonce (replay protection). Requests from the portal to the site are signed the same way.
– Statistics sharing is now opt-in, with a new settings tab „KEY DIGITAL statistika“ that lists exactly what is sent and what is not. Sites that were already sending statistics keep sharing on after the update and see a one-time notice with a link to switch it off.
– When sharing is switched off or the plugin is deactivated, the portal receives a single notice with only that state, so it can show „sharing off“ instead of „no data“.
– Nothing is counted or sent while sharing is off.
– Failed connection attempts back off (15 min, 1 h, 3 h, 6 h, 12 h, then daily); the next attempt time is shown in settings.
– New optional KEYD_WHMCS_SYNC constant to force and lock the setting from wp-config.php.
– Multilingual sites (Polylang, WPML, TranslatePress) always report their main address, so one site no longer appears as several (e.g. /en, /de) in the portal.
– Local and development installs (.local, .test, localhost, IP addresses, or WP_ENVIRONMENT_TYPE = local) never connect or send statistics.
Lead source tracking:
– The ref_source cookie is stored only after analytics consent (WP Consent API, Cookiez banner or window.kdSubmissionsHasConsent()), and deleted when consent is withdrawn.
– Fixed: the stored source was overwritten on every page view (expiry was checked as 5 ms instead of 30 days), so internal navigation turned leads into „direct visit“. A new UTM or external referrer now replaces the stored source; internal and direct visits keep it.
– Fixed: the tracking script was loaded twice.
– Cookie now uses SameSite=Lax and Secure on HTTPS.
– New filter keyd/referral/config (cookie name and lifetime, consent categories, direct-visit label).
Code quality:
– Request input sanitized and unslashed, database queries prepared, debug logging only when WP_DEBUG_LOG is on, aligned with WordPress coding standards.
2.1.0
- Added upgrade bootstrap rule so updates from 2.0.3 or 2.0.4 trigger an immediate one-time WHMCS daily sync.
2.0.4
- Added realtime WHMCS sync hooks for new submissions and contact clicks
- Added 60-second realtime throttle with aggregation so no event counts are lost
- Added daily reconciliation sync window to keep WHMCS totals aligned with WordPress
2.0.3
- Added dynamic mailto/tel click tracking via REST endpoint
- Added email/phone click metrics to dashboard stats and WHMCS sync payloads
- Replaced conversion-rate card with total contact-clicks card and added contact-clicks pie chart
2.0.2
- Added chunked backfill with persistent cursor
- Added sync watermark
- Added retry queue
- Added shared batched series payload builder for date ranges
2.0.1
- Split and update codebase to increase code quality
- Add integration with ERP system
1.2.1
- Completely remove licensing
- Change which is the default page, related links and buttons. Add redirects to previous links
- Add new submissions page. Display a combined list of all unviewed submissions
1.1.1
- Add a licensing system to analytics page
1.1.0
- Referral system, which shows the referral source in analytics and submission data
- Ability to add custom form names in settings
- Header and footer components with proper script loading, titles and favicon
1.0.7
- Add admin bar and admin menu items directing to plugin
1.0.6
- Resolve mismatched storage engines
- Resolve mismatched table collation
- Resolve mismatched column types
1.0.5
- Changed scripts and styles loading for theme compatabilty
1.0.4
- Added the ability to hide and show specific columns
- Improved UX and UI for editing names of columns
1.0.3
- WordPress good practices implmenetation
1.0.2
- Added ability for Editor and Shop Manager roles to access
/pieteikumiand/pieteikumi/addpages. - Enhanced role-based permissions for improved workflow control.
1.0.1
- Added primary template loading for
/pieteikumiand/pieteikumi/addpages, overriding any theme templates. - Clear LiteSpeed cache for
/pieteikumiand/pieteikumi/addpages on plugin activation and deactivation. - Styling changes for improved usability.
1.0
- Initial release with full-featured submission management.
- Dynamic status and comment management.
- Real-time UI updates using AJAX.
- Advanced filtering by form type, statuses, and creation dates.